Core Filled Snack Food Extruder-manufacture,factory,supplier from China

When using a twin-screw extruder, the twin-screw extruder needs to install the device correctly, so that it can save energy and time during production.The twin-screw extruder is fully automated from batching, extrusion, puffing, molding, core sandwiching, cutting, spraying to finished products at one time. The production line has the characteristics of many optional models, flexible equipment configuration, wide range of raw materials, many types of products, and simple operation.

　　The core filling snack food production line usually uses corn flour, big Rice noodles, flour, bean flour, etc. as the main raw materials, from ingredients, extrusion, expansion, molding, sandwich, shaping and cutting, baking, spraying and seasoning to the completion of finished products in one time, fully realizing automation. This core filling snack food production line is characterized by multiple models available, flexible equipment configuration, wide range of raw materials, multiple product types, and simple operation.

　　The core filling snack production line adopts advanced co extrusion technology to simultaneously extrude two products with different textures and flavors on a twin screw host, producing various popular puffed sandwich foods such as wheat flavored chicken nuggets, sandwich rice crispy, and rice fruits in the market. Nutritional powder, cereal Congee and puffed snack food of various shapes can be produced by changing molds and auxiliary equipment.

Puffed snack food is a kind of brittle food with delicate taste and rich taste. With the improvement of Chinese living standard and the change of consumption concept, all kinds of grain puffed food as a convenient, quick, nutritious leisure small snack, quickly enter many households. Leisure food production line has many optional models, flexible equipment configuration, a wide range of raw materials, a wide range of product types, simple operation and so on.

For extruder equipment, the model specifications of extruder equipment are classified according to the diameter of the screw. For the sake of explanation, plastic is used as an example below, but the same is true for food extruders.That is to say, the screw diameter of the extruder equipment is the model specification of the extruder equipment. For example, the screw diameter of the 90-type extruder equipment is 90mm.

Directly puffed food is generally required to be dried after extrusion processing. The moisture content of the dough in the extruder is 15%~20%. The product is then dried to reduce the moisture content to 2% to 3% to create the environment needed for a crunchy texture and stable shelf life. Due to the low density of the product, the drying time is usually very short, so it should be carried out in a warm warehouse.Coatings to produce direct-expanded products Extruded and dried products are finally sprayed with oils and seasonings.

Twin screw extruder is developed on the basis of single screw extruder. Two screws are placed side by side in the barrel of the twin screw extruder. According to the meshing degree of the two screws can be divided into mutual meshing type and non-meshing type. According to the rotation direction of the two screw shafts, it can be divided into reverse rotation type and co-rotation type.(1) meshing twin screw: Because the meshing gap of the meshing screw is very small, the material has the ability of forced conveying, not easy to produce backflow, leakage phenomenon.

Series double screw extruder introduction:1, mainly by the feeding system, extrusion system, rotary cutting system, heating system, lubrication system, control system.2, extruder feeding system, main drive system, rotary cutting system all adopt frequency control, strong power, smooth operation, power saving.3, automatic lubrication, forced cooling, to ensure the safe operation of the extruder and prolong the life.4, screw alloy material, through special processing, high strength, wear resistance, increase the service life.5, according to different products, with different structure and length

Features of Single Twin Screw Snack Extruder:The structure of the single-screw extruder is relatively simple and the price is low. Its disadvantage is that the scope of application is limited, and it is mainly used for materials with high starch content. There are still certain difficulties in the production of materials with high water content and high oil content. In addition, the process parameters are difficult to control, the machine is not easy to clean, the product form is poor and the output is small.Twin-screw extrusion extruder has many advantages.

　　The product produced by the puff snack production line is a kind of extruded snack. It uses advanced co extrusion technology to extrude two kinds of products with different texture and taste on a twin-screw host at the same time to produce popular McChicken pieces, sandwiched rice crisps, rice nuts and other puffed sandwich foods in the market. It can also change molds and auxiliary equipment to produce Breakfast cereal Congee, nutritional powder and puffed snack food of various shapes.